Wes Makes Upgrades to His 2003 Ford F-150 2WD

June 3rd, 2010 by admin

2003 Ford F150

I started working at 4 Wheel Parts back in 2007 when a friend who did sales here told me about the job. I mainly got into trucks because I needed transportation for my dirt bike when I was active and owned one.

Now I have a 2003 Ford F-150 2WD. These are some of the upgrades I’ve made to it:

Fabtech 3.5″ Spindle Lift
Daystar 1″ 3/4 Coil Spacers

Rancho RS 5000 Shocks

aFe Intake System

aFe Air Intake System

Corsa Exhaust

Corsa Exhaust System

Edge Evolution Programmer

Helo Wheels, Nitto Grappler Tires

Helo Series 791 Wheels

295X70R17 Nitto Terra Grappler Tires

I installed the air intake and that was simple, but it took almost 2 hours because I had crappy tools.

I put the wheels and tires on in our parking lot with a cheap jack, which took 2 hours. However, I didn’t actually mount and balance them because I was so anxious to put them on. In hindsight, I should have waited and just taken them to a shop.

, , , , ,

About the Author: admin

Share This Post

  • Email
  • Print
  • Twitter
  • Facebook
  • Digg
  • Stumble

2 Responses to “Wes Makes Upgrades to His 2003 Ford F-150 2WD”

  1. I just put the skyjacker leveling kit on my 2006 f150 supercrew (2wd) what are the largest tires I could fit on a stock 17in wheel?

  2. Nan, I would recommend 285x70r17. You can technically fit 33″ or 305 size tires under that truck but it will most likely create clearance issues. I’m assuming at this point your stock tire size is either a 245 or 265. If this is the case then stick with what I recommended

Leave a Reply